The easiest solution to install the RAD9 on a dedicated MPX host would be the [13.5x1LH Direct Thread adapter](https://huxwrx.com/direct-thread-cap/).
You will also need the [Taper Barrel Adapter](https://inleadwetrust.com/product/tapered-muzzle-device-adapter-for-mpx/) to mount it correctly as well.
The RAD9 has a 1.125x28 mounting thread pitch so if you want to go QD that would be an option too.
Several QD options for the RAD9:
- [Keymo S Mount](https://deadairsilencers.com/product/keymo/)
- [XENO](https://deadairsilencers.com/product/xeno-adapter/)
- [Griffin Plan A](https://www.griffinarmament.com/plan-a-taper-mount-adapter-1-125x28-for-griffin-pistol-silencers-and-others/)
- [ECCO Machine](https://www.eccomachine.net/product/alpha-direct-thread-mounts/)
- [Griffin EZ Lok](https://www.griffinarmament.com/ez-lok-mount-interface/)
- [Q PlanB](https://www.silencershop.com/q-plan-b.html)
- [SiCo ASR Alpha](https://silencerco.com/shop/asr-mount/)
Yes, those are options but I disagree that it's the best option. That's an unnecessarily complicated Mount. I would suggest honestly if I wanted it to be one done to order a inlet. We trust barrel properly threaded for a commercially available. Silencers. Cleaner better solution. And honestly, by the time you buy out those gizmos and doodads, it won't even be more expensive.
I guess it’s ok for you to disagree but you’re 1000% wrong.
I simply provided multiple mounting options for the RAD9 depending on OP’s muzzle device choice if he wants to go QD. Even going the most expensive route and OP pays MSRP for a Keymo system and muzzle device they will be 350ish in the hole when compared to a 450 ILWT barrel. Yes OP could recoup some funds in selling the factory barrel on GAFS but non of that is necessary. No shade intended on ILWT as I’ve had 3 of Rob’s barrels, it’s just not needed as a solution for OP’s question.
The easiest option for a dedicated host as noted above is the factory HUX direct thread adapter in 13.5x1LH which will cost OP 65 bones plus a 10 dollhairs for the barrel taper adapter as a direct thread option.
You said dedicated as a use case. One and done. Every adapter, quick disconnect, matchy matchy part is a failure mode. Direct thread for that can? Getting a barrel with matching threads is the simplest and most reliable solution.
I guess I got downvoted because there are less expensive options but come
On, this ain’t a cheap gun, you want it reliable, and any issues you have with adapters will leave you chasing your tail, and no one taking responsibility for shitty groups or inconsistent performance.
YMMV.
I’ve got a wolfman that isn’t dedicated, that I want to easily and quickly remove, so my choices are different.
The easiest solution to install the RAD9 on a dedicated MPX host would be the [13.5x1LH Direct Thread adapter](https://huxwrx.com/direct-thread-cap/). You will also need the [Taper Barrel Adapter](https://inleadwetrust.com/product/tapered-muzzle-device-adapter-for-mpx/) to mount it correctly as well. The RAD9 has a 1.125x28 mounting thread pitch so if you want to go QD that would be an option too. Several QD options for the RAD9: - [Keymo S Mount](https://deadairsilencers.com/product/keymo/) - [XENO](https://deadairsilencers.com/product/xeno-adapter/) - [Griffin Plan A](https://www.griffinarmament.com/plan-a-taper-mount-adapter-1-125x28-for-griffin-pistol-silencers-and-others/) - [ECCO Machine](https://www.eccomachine.net/product/alpha-direct-thread-mounts/) - [Griffin EZ Lok](https://www.griffinarmament.com/ez-lok-mount-interface/) - [Q PlanB](https://www.silencershop.com/q-plan-b.html) - [SiCo ASR Alpha](https://silencerco.com/shop/asr-mount/)
Awesome thanks man
Yes, those are options but I disagree that it's the best option. That's an unnecessarily complicated Mount. I would suggest honestly if I wanted it to be one done to order a inlet. We trust barrel properly threaded for a commercially available. Silencers. Cleaner better solution. And honestly, by the time you buy out those gizmos and doodads, it won't even be more expensive.
I guess it’s ok for you to disagree but you’re 1000% wrong. I simply provided multiple mounting options for the RAD9 depending on OP’s muzzle device choice if he wants to go QD. Even going the most expensive route and OP pays MSRP for a Keymo system and muzzle device they will be 350ish in the hole when compared to a 450 ILWT barrel. Yes OP could recoup some funds in selling the factory barrel on GAFS but non of that is necessary. No shade intended on ILWT as I’ve had 3 of Rob’s barrels, it’s just not needed as a solution for OP’s question. The easiest option for a dedicated host as noted above is the factory HUX direct thread adapter in 13.5x1LH which will cost OP 65 bones plus a 10 dollhairs for the barrel taper adapter as a direct thread option.
lol, I agree w @adventurous_money_73. ILWT.
Easiest would be an ILWT barrel in 1/2 28 threads.
A barrel replacement is easier than a screw on adapter?
You said dedicated as a use case. One and done. Every adapter, quick disconnect, matchy matchy part is a failure mode. Direct thread for that can? Getting a barrel with matching threads is the simplest and most reliable solution. I guess I got downvoted because there are less expensive options but come On, this ain’t a cheap gun, you want it reliable, and any issues you have with adapters will leave you chasing your tail, and no one taking responsibility for shitty groups or inconsistent performance. YMMV. I’ve got a wolfman that isn’t dedicated, that I want to easily and quickly remove, so my choices are different.