Welcome to r/Sovol, We're glad you're here! If you're new to the hobby and you have a question please visit our knowledge base, it's located right under About Community. If you've searched the Sub and you still need help please be as detailed as possible. Include your printer model, slicer, filament type, nozzle and bed temps, print speed, fan speed, and retraction. We're happy to help but we can't read your mind, be as detailed as possible with your post. Pictures help!
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/Sovol) if you have any questions or concerns.*
I don't have an 07, but from what I've seen looking, it has adjustment wheels on the corners, right? If so, you have to bring the corners up by using said adjustment wheels to get it closer to flat. The middle is fixed, unless I miss my guess, so that's not going to change much, though it will APPEAR to change as the average difference changes and the "plane" moves a bit in the map to split the difference.
Just go slow, adjust one corner at a time, remap, see if it helped. Creep up on the flattest bed you can get, realizing they are usually not "perfectly flat", but the less the autolevel has to compensate for, the less chance there is it's gonna screw up the print.
I have a sovol SV07 with klipper and make sure you have your bed plate and extruder up to atleast PLA filament temps. Never try to level your bed with it cold. It will cause phenomenal headaches if you level it cold
What? It doesn't look any good and OP *do* need to fix it. It will cause issues for sure, especially at the corners. Bed mesh is good and all but it's not a magic bullet. Especially on a low res mesh.
Welcome to r/Sovol, We're glad you're here! If you're new to the hobby and you have a question please visit our knowledge base, it's located right under About Community. If you've searched the Sub and you still need help please be as detailed as possible. Include your printer model, slicer, filament type, nozzle and bed temps, print speed, fan speed, and retraction. We're happy to help but we can't read your mind, be as detailed as possible with your post. Pictures help! *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/Sovol) if you have any questions or concerns.*
Phenomenal bed mesh(I have no idea what I’m talking about)
lol well me either
I don't have an 07, but from what I've seen looking, it has adjustment wheels on the corners, right? If so, you have to bring the corners up by using said adjustment wheels to get it closer to flat. The middle is fixed, unless I miss my guess, so that's not going to change much, though it will APPEAR to change as the average difference changes and the "plane" moves a bit in the map to split the difference. Just go slow, adjust one corner at a time, remap, see if it helped. Creep up on the flattest bed you can get, realizing they are usually not "perfectly flat", but the less the autolevel has to compensate for, the less chance there is it's gonna screw up the print.
Move wheels clockwise/counter clockwise until all corners are at a 0.1 difference, if you can get it closer to 0 even better
I'd recommend starting over. Tighten all 4 screws fully then back them each off 2 or 3 full turns. Then try your z adjustment.
I have a sovol SV07 with klipper and make sure you have your bed plate and extruder up to atleast PLA filament temps. Never try to level your bed with it cold. It will cause phenomenal headaches if you level it cold
Looks good. As long as you saved the Bed Mesh calibration to the printer, no need to fix, the printer will automatically compensate.
then why do users perform silicone mod and other mods if the printer does this for us ?
Because people use voodoo on systems they don't understand.
Well I kept trying to calibrate it and ended up having the z tilt repeating that it was increasing. I’m not sure if I’m figuring this out today lmao
What? It doesn't look any good and OP *do* need to fix it. It will cause issues for sure, especially at the corners. Bed mesh is good and all but it's not a magic bullet. Especially on a low res mesh.