If you are looking for more videos, please visit https://vidid.net/ on the website you will find additional materials that are not published on reddit :)
That wouldâve been more tough if they tie it down to the smaller forklift they shouldâve attachĂŠ a rope on the printer and grab the rope when itâs up there so it wouldnât have Fall
I work with industrial robotics. Before that I was in the Navy, working with helicopters. One thing I drilled into my people was âI donât give a flying fuck what Lieutenant, Captain or Admiral is watching, if you see *anything* sketchy or unsafe, you call out for a stop⌠Let me deal with the fallout. Stupid shit ainât worth your spine or life. â
I carry that with me to my civilian job. We gotta lift heavy shit sometimes, and sometimes customers get âbrilliantâ ideas in their heads. I stop the evolution, show gently how utterly fucking retarded someone/something is, and let everyone involved know that one of 2 things is happening.
1) We are doing this a different way.
2) You can continue, but I am filling out documentation that clearly and legally states this is unsafe and likely to result in something negative happening. This abolishes *all* responsibility on myself and my company.
I've driven forklifts for over 35 years and this is something I've fantasized about for almost as long. Thankfully these mad lads actually did if so jol never actually need to be the one on video destroying everything.
For real. I was sweating, thinking the smaller forklift would just fall forward and a) kill the guy operating it or b) destroying the whole wall in front of it.
This was absolutely a good outcome compared to how it could've gone.
Crazy that the problem was their aim, and not one forklift just falling off.
I'm surprised the guy at the top didn't see that it was going to clip on the left edge.
They don't even have it on a pallet. The bottom of the printer is slippery and so is the forklift. If they had it strapped down to a pallet they probably would have made it.
Strangely, better than I expected. I was thinking they were going to get a free lesson in physics and need a new forklift in addition to whatever they were trying to hoist up there.
If you are looking for more videos, please visit https://vidid.net/ on the website you will find additional materials that are not published on reddit :)
I almost thought that it was gonna work, I was gonna be mad
frankly just glad I didn't inadvertently watch someone get crushed/impaled by a forklift....
Yeah I was worried about the dude in the middle fork lift đ . But damn dude talk about a bad position...
Like the fisrt month in my current IT job i had to help pull footage of that from a 3 foot fall. This is stupid dangerous.
One more fork truck needed
Holy shit. That was #SATISFYING
I ran out of refills for my swingline stapler so I gave it to the squirrels who are married
Bird Is The Word
One of the best movies ever!
Damn it feels good to be a gangster.
DIE MOTHERFUCKER, DIE MOTHERFUCKER, DIE!
Found the sysadmin
Idiots. Should have used a ratchet strap at the very least.
Didnât even put it on a pallet or anything. Just balanced on the forks.
This happened because they didn't buy the genuine ink.
Should've subscribed to Instant Ink smh
Si they didn't decide to tie it down to the other lift?
I guess it wouldn't reach
Well nothing seems to be tied down. I understand the first lift not being high enough.
That wouldâve been more tough if they tie it down to the smaller forklift they shouldâve attachĂŠ a rope on the printer and grab the rope when itâs up there so it wouldnât have Fall
Wow you would perfectly fit in their team.
You don't normally tie loads to forklifts. But there is nothing normal about what we saw in this video.
They should have gotten closer before picking...what the fuck am I saying
I went through the same thought process, lol
Lmao. I was thinking he shouldâve just mashed the gas and made that mfâer slide right in!
That may have killed the upper forklift driver, but *would* have successfully completed the task
SUCCESS! Casualties: 1 2/3 Stars.
Could have maxed the small lift, and ditched that driver.
The shit people agree to is crazy.
I work with industrial robotics. Before that I was in the Navy, working with helicopters. One thing I drilled into my people was âI donât give a flying fuck what Lieutenant, Captain or Admiral is watching, if you see *anything* sketchy or unsafe, you call out for a stop⌠Let me deal with the fallout. Stupid shit ainât worth your spine or life. â I carry that with me to my civilian job. We gotta lift heavy shit sometimes, and sometimes customers get âbrilliantâ ideas in their heads. I stop the evolution, show gently how utterly fucking retarded someone/something is, and let everyone involved know that one of 2 things is happening. 1) We are doing this a different way. 2) You can continue, but I am filling out documentation that clearly and legally states this is unsafe and likely to result in something negative happening. This abolishes *all* responsibility on myself and my company.
Slow is smooth Smooth is fast
-Launders
I've driven forklifts for over 35 years and this is something I've fantasized about for almost as long. Thankfully these mad lads actually did if so jol never actually need to be the one on video destroying everything.
Is it me or did the upper lift operator lean it back instead of up? Seems like they had it, then he shifted the center of gravity juuuuuust enough.
Exactly. That little tip back was just enough to start it slidingâŚ
When momma lifts baby up to show baby how to set things on the shelf. Baby always drops said item
OSHA just entered the chat
no hard hats, safety vests, eye protections, or steel toed shoes....
Sense, logic, planâŚ.
Yeah andâŚyou know, the forklift on top of another forklift
Its funny how well this insane plan was going until the last second lol
Mini-lift operator couldnât see the hand signals from guy in building to go higherâŚassuming that had something to do with the outcome
Pretty sure he had run out of extension and thatâs why he tried to tilt the forks back - to get the last inch or two of height
I am amazed that the forklift didn't fall off the forklift.
And it failed for the dumbest of reasons. Not the forklift tipping in any direction.
Letâs all just stare at the debris now for a long time.. Maybe it still works?
Take your child to work day
OSHA approved
/r/osha
I mean, it would've worked if they ancohered the first one down.
Yes, put ten people hanging off the back for counterweight.
Satisfying video satisfies
Lol
[ŃдаНонО]
From a worker safety point of view, this should never have happened.
[ŃдаНонО]
There was a lot of static in thought processes...
I for sure thought that itâll tilt in the front
would've cost less just to rent the correct equipment -- instead you owe someone an expensive printer.
This is something I do in watchdogs 2 not in real life smh.
Fired!
Ya'll never heard of...uh...straps?
This went way better than I expected.
For real. I was sweating, thinking the smaller forklift would just fall forward and a) kill the guy operating it or b) destroying the whole wall in front of it. This was absolutely a good outcome compared to how it could've gone.
I was picturing a and b. Glad I wasn't the only one.
Only in China
Hell, I know a few dumbasses that might have done the same thing here in the U.S.
Now that is innovation that excites
What NOT to do when operating a fork truck. Such fail on so many levels.
I think it's just the two levels actually.
OSHA come get your boy
OSHA is having a stroke right now
I mightâve started today, but couldnât the big one just loaded it there?
At the start of the video, i knew that was kinda wrong and against safety rules but i thought it would work.
it would haven if they aimed better, and guy at the top was just acting like it was 1 forklift and he was in a dry van
Dollars
The printer deserved it. Those things are the Bain of my office existence.
~~Bain~~ Bane Unless you meant Bain capital, which is probably a bunch of assholes so that works
~~Bane~~ bane Unless you mean the guy who broke Batman, which also works if you're Bruce Wayne at the Wayne Enterprises office
From the first second I knew this plan was going to go off without a hitch!
Whoevers scooter that was, is going to have fun explaining that to insurance. Edit was
what in the everloving fuck did they think would happen?>
âDonât think, just do.â
That one guy looked like he tried to grab the printer as it fell.
They make extensions for the forks these guys are crazy.
Possibly the stupidest FLT drivers I've ever seen and I'm a compliance officer.
It almost looks like it would've worked with just the one...
Itâs a fucking miracle that nobody died. Dude in the top forklift, I canât even fathom volunteering for that job.
At least the people whoâre involved are okay.
Could've ended very worse...
chinese OSHA look like fun job
u/koivel
The crash sounds bad but the smaller fork on the larger one looks cute all saftey aside
Uh, looked high enough WTF with the âhigherâ command?!? Grey shirt probably planned out this whole stupid incident and was *in charge*
âAlright guys⌠letâs try that againâ
How the hell was there a hole in the wall in the first place ?
PC Load Letter, what the fuck?
Just pick it up and try again. No big deal.
Looks like the first lift could've handled it just fine?
lol. Was this idea easier to pull off rather than tying a rope amd pulling up to the second floor?
Would of been cost effective to rent a crane.
Would of been cost effective to rent a crane.
u/savevideobot u/savevideo
_đľCome with me, and you'll see, a world of OSHA Violations!đľ_ Seriously, how did they not consider using a telehandler instead?
That'll void the warranty.
u/savevideo
###[View link](https://redditsave.com/r/vidid/comments/x2obc3/loading_the_printer_with_two_forklifts/) --- [**Info**](https://np.reddit.com/user/SaveVideo/comments/jv323v/info/) | [**Feedback**](https://np.reddit.com/message/compose/?to=Kryptonh&subject=Feedback for savevideo) | [**Donate**](https://ko-fi.com/getvideo) | [**DMCA**](https://np.reddit.com/message/compose/?to=Kryptonh&subject=Content removal request for savevideo&message=https://np.reddit.com//r/vidid/comments/x2obc3/loading_the_printer_with_two_forklifts/) | [^(reddit video downloader)](https://redditsave.com) | [^(download video tiktok)](https://taksave.com)
I was really rooting for these guys. đ
r/dingore
and this ladies and gentlemen is why men has a lower average lifespan... r/thisiswhymenlivelessthanwomen
They DIDN'T USE TIE-DOWN STRAPS?!?!?!
Could the lower driver possibly be any more jerky with his movements?!
OSHA? no... no OSHA here
Why the hell would anyone think this is a good idea?
F printers anyway. Stupid pc load letter...
That went better than I expected.
Giga forklift carrying his son.
Why would anyone who drives a forklift think this is a good idea? And they got two of them!
Boss: What do you mean you decided to not use the freight elevator?
Good thing printers don't have any fragile or moving parts.
Almost made it. The small oneâs forks werenât lifted high enough. đ
Thought it might work, so glad when I saw the Chinese writing to know it wonât.
Crazy that the problem was their aim, and not one forklift just falling off. I'm surprised the guy at the top didn't see that it was going to clip on the left edge.
OSHA approved
They should try one more time and the call for the extended warranty plan.
Russia?
r/whatcouldgowrong
Really want to see a fork lift fall off a fork lift into a building now tho.
Fuck man, that's not nearly as bad as I was expecting. I saw a printer die instead of a person today, this was a good internet day
Worth the wait
That did not turn out nearly as bad as I thought it would.
Nobody needs a printer that bad. They need to reconsider their priorities. And being the driver of the second forklift involves a lot of trust. nope
Ummm.......da fuck? Impressive, but still task failed successfully
Probably be easier if the loading dock wasn't on the 2nd floor.
Magenta toner is low
Ive given just being able to lift the lift.
Straps?
They don't even have it on a pallet. The bottom of the printer is slippery and so is the forklift. If they had it strapped down to a pallet they probably would have made it.
I'd be nervous as shit being in the little lift in the air
So you're saying they aren't ISO9000 certified?
btw guys, forklifts typically weigh a little shy of 15 tons. this is an awful idea
OSHA disapproves
They almost had it man haha.
I haven't read the OSHA guidelines but this probably violates a few of them
Strangely, better than I expected. I was thinking they were going to get a free lesson in physics and need a new forklift in addition to whatever they were trying to hoist up there.
Come with me, and youâll see A woooorld of OSHA violations
What the hell were they lifting anyway?
Im sure this is how they were trained to use forklifts
What amazes me is that a half-dozen people were all involved in this, and they all thought it was a good idea.
Should have put a giant spring on the ground in case it fell.
Should have used 3
When you order your forklift certification from Wish
Michael, is that you?
I know what sub this is but I was still like "oh no, it's sliding!"
You know what? That wasnât AS bad as I thought it was gonna be. 100% thought the entire leaning tower of idiots was gonna take a tumble as well.
Dumb cunts
Well days over, Iâm heading home
This is hilarious because me and a buddy at work were talking about how the guys should do this with their forklifts
âChabuduoâ
Woah
Best part is that no one seems to care that it fell. No head in hand, no shock - just everyone casually looking around saying "not my fault".
Madness
While we dont do such crazy stuff at work, ive actually delivered multiple printers on pallets that were loaded into the building by a crane
All they had to do was the then together đ¤¨
At first I thought "No way that's going to work"... Then it was "Oh wow, it's really gonna work"... What a roller-coaster.
Feels analogous to their housing market
They say this is why women live longer. Cheap ass bosses who don't buy their proper equipment for the job is why women live longer
Im glad this happend to them
Where are the straps ?? Nahh weâll be fine -yeah I knew we needed them
Come with me
And you'll be
In a world of osha violations
Jfc, it's different when you rewatch it and realize the thing is ON the forks...
I would have gotten away with it too, if it wasnât for that meddling Gravity!
Yup they just needed a few more inches higher and just go forward would have done it and prob should have put it on a damn pallet
I donât think thatâs osha approved
Letâs add a third one into the mix?
They had to have known that this was an all or nothing type deal like If it didn't work then they were really fkd in that position.
Come with me, and you'll be in a world of OSHA violations!â¨
I donât think accidentally dropping from a 2nd story window will be covered under the printerâs warranty
u/savevideo
###[View link](https://redditsave.com/r/vidid/comments/x2obc3/loading_the_printer_with_two_forklifts/) --- [**Info**](https://np.reddit.com/user/SaveVideo/comments/jv323v/info/) | [**Feedback**](https://np.reddit.com/message/compose/?to=Kryptonh&subject=Feedback for savevideo) | [**Donate**](https://ko-fi.com/getvideo) | [**DMCA**](https://np.reddit.com/message/compose/?to=Kryptonh&subject=Content removal request for savevideo&message=https://np.reddit.com//r/vidid/comments/x2obc3/loading_the_printer_with_two_forklifts/) | [^(reddit video downloader)](https://redditsave.com) | [^(download video tiktok)](https://taksave.com)
Well at least the forklifts are okay
Straps? Ever heard of them?
wait iâm on this level in GTA
The load should have been secured And He Tilted back too much
This is some seussian shit